Intelligent atomizing hand disinfectorH-S017
Rated voltage:AC220/50Hz
Power:25W
Safety type: Class II
Fuse:5A*2
Ambient temperature:5-40degrees
Ambient humidity:80%
Capacity:2000ML
Spray Volume1-8ML
Working mode: automatic induction
Sensing distance:10-13CM
Installation mode: wall mount/desktop
Net weight:5KG
OI (operating instructions)
1.& nbsp;Please clean and disinfect the disinfectant container of this machine before use. Use75%alcohol disinfectant to soak in the container for5-15minutes, and gently shake the machine from time to time to achieve cleaning and disinfection effect, drain the liquid from the drain valve and plug back to the drain port.
2.& Plugin the power supply and turn on the power switch, the red power indicator light will be on, then re-add the disinfectant, be sure to use the configured special plastic filter funnel, to avoid liquid overflow into the machine caused by electric shock and damage to the machine, but also to prevent impurities in the liquid blocking the spray nozzle.
3.& nbsp;Add the liquid slowly, pour in the disinfectant with the loading volume not exceeding2000ml, pull out the filter funnel after adding the liquid, cover the container lid and close the liquid adding port slide cover, and add the liquid.
4.& nbsp;When using this machine, you should reach your hand to about 8cm below the spray nozzle of this machine for many times, so that the gas in the exhaust pipe of this machine can be sprayed normally. Green indicator light flashes when spraying. It indicates that the machine is working normally, and the green indicator light will automatically go out when the spray stops. 5.& nbsp;If there is no liquid spray during use, check whether there is a lack of liquid and supplement the liquid in time.